Arabic
Spanish
German
French
Sanskrit
MODEL / PART NO. SSPTW0500KG0
The SIMPLEX SINGLE Worm Vacuum Plodder Is Suitable For Extrusion Of Soap Bar.
The Components Of Plodder Are:-
The Components Of Plodder Are:-
| Sr. No. | Perticulars | Tech. Specs |
|---|---|---|
| 1 | CAPACITY / VOLUME | 500~700 KGS/HR |
| 2 | CONTACT PART | AISI S.S. 304 |
| 3 | BARREL DIAMETER AND SCREW DIAMETER | 250 MM |
| 4 | OTHER PART | IS 2062 CARBON STEEL / IS 808 |
| 5 | FLANGES | IS 2062 CARBON STEEL |
| 6 | BARREL SHELL | S.S. 304 |
| 7 | OUTER COOLING | CARBON STEEL |
| 8 | FASTNERS | IS 1364 |
| 9 | CONE BODY | S.S. 304 |
| 10 | OUTER HEATING JACKET | M.S. FABRICATED |
| 11 | END FLAGE | M.S. |
| 12 | HEATER / THERMOSTAT | STANDARD MAKE |
| 13 | CONE TROLLEY | M.S. FABRICATED |
| 14 | BEARING HOUSING | M.S. / CAST - IRON |
| 15 | BEARING | E.N. 8 |
| 16 | DRIVE SHAFT | E.N. 8 |
| 17 | NOODLE PLATE | S.S. 304 |
| 18 | WORM SCREW | S.S. 304 |
| 19 | WORM SUPPORT | S.S. 304 |
| 20 | REDICOMG GEARBOX | U 600 RATIO 30:1 GREAVES MAKE - WORK & WORM WHEEL TYPE (HORIZONTAL) |
| 21 | MOTOR | 15 HP FOR PRIMARY PLODDER |
| 22 | DIMENSIONS | FURNISH AFTER YOUR ALYOUT |
UTILITIES
1) Vacuum - NOT REQUIRED
2) Steam - Not Required
3) Cooling Water Flow Rate Required 1000 ltrs /HR
4) Cooling Jacket Volume - 75 Ltrs. For Each Barrel
5) Electricity - 15 HP.